大型仪器共享管理系统

"1.目镜：10X，15X含测微尺；
2.物镜：5X和35X。
总放大倍数：50X，75X，350X和525X；
3.显微镜： Y（粗细/精细同轴旋钮）30mm；
X（细微调节旋钮）约5°；
Z（倾斜精细控制旋钮）3°；
4.加热丝操纵器移动距离：X轴14mm，Y轴14mm，Z轴14mm；
5.玻璃管操纵器移动距离X12mm，Z28mm；
6.玻璃管直径（外径）1-1.5mm。

1. Eyepiece: 15X, including micrometer;
2. Objective lens: 5X and 35X.
Total magnification: 75X and 525X；;
3. Microscope: Y (thickness/fine coaxial knob) 30mm；;
X (fine adjustment knob) is about 5;
Z (tilt fine control knob) 3;
4. Moving distance of heating wire manipulator: X axis 14mm, Y axis 14mm, Z axis 14mm;
5. The moving distance of the glass tube manipulator is X12mm, Z28mm；;
6. The diameter (outer diameter) of the glass tube is 1-1.5mm."

锻针仪能够在用内置显微镜观察尖端的同时生产微量吸管。MF2根据实验需要，通过切割、火抛光、弯曲和形成尖状物的微加工来制造各种移液管。在显微镜中看到移液器的尖端，确保制造出您喜欢的移液器。显微镜设计紧凑而坚固，降低了操作过程中移液器破损的风险。所有的精细控制都由安装在显微镜上的可靠旋钮执行。如果需要，聚焦旋钮可以切换到显微镜的左侧。对工作至关重要的加热器水平读数显示在显示屏上。加热器用脚踏开关打开和关闭。作为光源的LED灯允许从低到高的亮度调节。（Microforge is useful instrument which enables production of micropipette while seeing the tip with built-in microscope. The MF2 fabricates various kinds of pipette by micro-works of cutting, fire-polishing, bending and forming a spike in needs of experiment. Seeing the tip of pipette in the microscope ensures to fabricate pipette of your preference. The microscope is designed as compact yet robust unit which reduces risk of pipette breakage during the handling. All of fine controls are performed by reliable knobs installed on the microscope. The focusing knob can be switched to the left side of the microscope if needed. The readout of heater level, which is essential for the work, is indicated on display. The heater is turned on and off with foot switch. The LED lamp as the light source allows brightness adjustment from low to high.）

主要规格及技术指标

主要功能及特色

主要附件及配置